For reference only, subject to actual

Water-soluble flux 706 Introduction

This 706 water-soluble flux developed by Unibright is a water soluble organic active flux specially designed for automatic welding equipment with a water washing process.

Enquire now

Sample test

Water-soluble flux 706 Product Features

Completely halogen-free and rosin free, with minimal corrosion on the metal surface of the plate and welding equipment; The welding effect on metal surfaces such as silver and copper is very good, without irritating odors; Water cleaning has a fast dissolution rate and good effect, with extremely low ion residue after ultrasonic cleaning; The solder joints are full and bright, with high strength.

Water-soluble flux 706 Applicable process

The application method of Unibright 706 flux can be impregnation and coating, with good process adaptability.

Apply for product information

Water-soluble flux 706 Application

? When using the impregnation process, pay attention to the immersion height and control the welding residue. Regularly and appropriately add diluents and control the specific gravity to maintain the uniformity and stability of the active ingredients of the flux during use.

? The service life of soldering flux varies slightly due to process conditions. When the flux is not in working condition, it should be kept in a sealed container as much as possible to avoid solvent evaporation. When it is necessary to replace the flux, the flux container should be thoroughly cleaned and replaced with a new flux in full.

? Pre heating after applying flux can fully utilize the advantages of water-soluble flux. It is recommended that the preheating temperature should be such that the welding surface temperature reaches 100-150 ℃ after preheating.

? Wash with hot water at 50-60 ℃, combined with ultrasound to achieve the minimum ion residue without the need for any cleaning agent.